Deep Foundation Steel Solid Square Hub Helical Round Corner Helical Anchor Pile Rod Driven Anchor

• Customization: Available
• Finish: Hot-Dip Galvanized
• Installation Method: Powered Installation
• Material: Steel
• Type: Earth Anchor
• Raw Material: Customized
• Helix: Customized
• Shaft: Customized
• Diameter: 2-7/8"
• Length: 7 Feet
• Tube Thickness: 0.217", 0.276"
• Surface Treatment: Hot DIP Galvanizing with an Average of Over 80 Mic
• Transport Package: Steel Pallet
• Specification: customised
• Origin: China
• HS Code: 730110
• Production Capacity: 50000 Sets Per Year
• Package Size: 58.00cm * 23.00cm * 23.00cm
• Package Gross Weight: 100.000kg

Product Description

Product Name	Screw anchor
Material	Carbon Steel
Surface Treatment	Powder
Application	Power line fittings,Solar Power System
Certificate	ISO9001,CE
Delivery Time	35 Days
Port	Qingdao
Payment Term	T/T,L/C

Square Shaft
Consists of solid square shafts, ranging from 1.5″ to 2″. The piles are typically used for ultimate loads between 100 and 650 kN (25-150 kips) but have been tested to loads in excess of 900 kN (200 kips) in unique situations.
Square shaft products are generally used in small to moderate loading applications, and they provide excellent tension resistance. Square shaft piles are able to penetrate dense and cobble-rich soil when compared to their helical pipe pile equivalents, but they have lower resistance to buckling and negligible lateral load resistance.
In applications where tension is the primary consideration, we recommend the Square Shaft Piers. They have several advantages over the typical square shaft anchors.



A complete Power Hub Screw Anchor assembly consists of a helical hub, anchor rod and eyenut.  The helix size (diameter) and number of helices are selected for the required holding strength.  The hub, either socket drive or solid hub, is selected for installation torque requirement.  The rod diameter is determined by the guy load and installed depth, and eyenut for the number of guys.

The no wrench screw anchor is a type of earth anchor; it functions by basically guying cables or wires within utility poles, which is comprised of an angle-cut tip, welded helix and an anchor rod of forged-eye.

The No-Wrench Anchor can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle cut tip.

These anchors are ideal for use in medium dense to loose soils. Final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.


Screw Anchor Dimensions as follows:

CODE NUMBER	TYPE	SIZE	THREAD LENGTH
		(inch)	(inch)
THAR01	5/8 inch	5/8*8	4
THAR02		5/8*10	4
THAR03		5/8*12	6
THAR04		5/8*14	6
THAR05		5/8*16	6
THAR06		5/8*18	6
THAR07		5/8*20	6
THAR08	3/4 inch	3/4*10	4
THAR09		3/4*12	6
THAR010		3/4*14	6
THAR011		3/4*16	6
THAR012		3/4*18	6
THAR013		3/4*20	6
THAR014	1 inch	1*12	6
THAR015		1*14	6
THAR016		1*16	6
THAR017		1*18	6
THAR018		1*20	6

 

• Used for securing up to 3 guy wires at a utility pole.
• Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment.
• Eye dimensions are the same as Anchor Rods.
• Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix.
• Hot dip galvanized to meet ASTM Specification A123.
• Holding strength per soil class for 3/4" rod:
  • Soil Class 5: 6500 lbs
  • Soil Class 6: 5000 lbs
  • Soil Class 7: 2500 lbs
• Typical working torque is 400 ft lbs.

Material:  Carbon steel    C1045        
Process: Forging          
Surface: hot Dip Galvanized,        
Packing:  pallet        
Standard: ASTM E488        
Main Maket: Europe, Middle East, US, Australia, Canada, etc        
        
Customized requirements are welcome!        
        
Origin: China FOB Port: : Qingdao        
Lead time: 15~45 Days        
Standard: CE, ISO        


 

The No-Wrench Anchor can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle cut tip.

These anchors are ideal for use in medium dense to loose soils. Final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.