Solid Square and Round Shaft Helical Pile Helical Anchor Ground Screw Earth Anchor

• Customization: Available
• Finish: Hot-Dip Galvanized
• Installation Method: Powered Installation
• Load Capacity: 2000 lbs
• Material: Steel
• Type: Helical Anchor
• Raw Material: Customized
• Helix: Customized
• Shaft: Customized
• Diameter: 2-7/8"
• Length: 7 Feet
• Tube Thickness: 0.217", 0.276"
• Surface Treatment: Hot DIP Galvanizing with an Average of Over 80 Mic
• Transport Package: Steel Pallet
• Specification: customised
• Origin: China
• HS Code: 730110
• Production Capacity: 50000 Sets Per Year
• Package Size: 1100.00cm * 1100.00cm * 1100.00cm
• Package Gross Weight: 300.000kg

Product Description

Product Name	Screw anchor
Material	Carbon Steel
Surface Treatment	Powder
Application	Power line fittings,Solar Power System
Certificate	ISO9001,CE
Delivery Time	35 Days
Port	Qingdao
Payment Term	T/T,L/C

A complete Power Hub Screw Anchor assembly consists of a helical hub, anchor rod and eyenut.  The helix size (diameter) and number of helices are selected for the required holding strength.  The hub, either socket drive or solid hub, is selected for installation torque requirement.  The rod diameter is determined by the guy load and installed depth, and eyenut for the number of guys.

The no wrench screw anchor is a type of earth anchor; it functions by basically guying cables or wires within utility poles, which is comprised of an angle-cut tip, welded helix and an anchor rod of forged-eye.

The No-Wrench Anchor can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle cut tip.

These anchors are ideal for use in medium dense to loose soils. Final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.

• Square Solid Bar Helical pile also called Square Solid Bar Piling, Square Bar Helical Anchor, Square Shaft Helical piles etc.

• Bar Material: ASTM 5140 or ASTM 1045 steel, round corner 5mm radius

• Helix Plate material conforms to ASTM  A36 hot rolled plate

• Helix thickness are available in 3/8" and 1/2"

• All helix leading edges sharpened and rock cut and 45 degrees

• Corrosion protection to conform to ASTM A123 standard for Hot-Dipped Galvanized

• A better conventional solid steel with extra-high strength

• Avoid heat damage on shaft caused by upset coulping process

Specifications
Shaft size(inch)	Lead Length(ft)	Helix Size(inch)	Helix thickness(inch)	Extension Length(ft)
1 1/2	3/5/7/10	8/10/12/14	3/8 or 1/2	3/5/7/10
1 3/4	3/5/7/10	8/10/12/14	3/8 or 1/2	3/5/7/10
2	3/5/7/10	8/10/12/15	3/8 or 1/2	3/5/7/10

Applied Load
The loads that the structure will apply to the pile it connects to. These loads include the dead load, live load, lateral loads, and seismic loading that the pile is being used to resist.
Soil Parameters
Soil strength is reviewed to make sure that it can withstand the load applied by the pile and helix plates.
Pile Capacity
The amount of load that a pile can resist. The pile shaft and connection are selected to resist the applied load. The helix plates are designed based on soil information to ensure that they are the right size.
Termination brackets transfer the load to the pile at the head. The termination bracket is connected to the foundation, typically by attaching it to or casting it into a concrete foundation, or directly to a steel grillage structure.


Screw Anchor Dimensions as follows:

CODE NUMBER	TYPE	SIZE	THREAD LENGTH
		(inch)	(inch)
THAR01	5/8 inch	5/8*8	4
THAR02		5/8*10	4
THAR03		5/8*12	6
THAR04		5/8*14	6
THAR05		5/8*16	6
THAR06		5/8*18	6
THAR07		5/8*20	6
THAR08	3/4 inch	3/4*10	4
THAR09		3/4*12	6
THAR010		3/4*14	6
THAR011		3/4*16	6
THAR012		3/4*18	6
THAR013		3/4*20	6
THAR014	1 inch	1*12	6
THAR015		1*14	6
THAR016		1*16	6
THAR017		1*18	6
THAR018		1*20	6

 

• Used for securing up to 3 guy wires at a utility pole.
• Anchors are installed by simply turning anchor into ground. No Wrench Anchors may be driven by hand or with power equipment.
• Eye dimensions are the same as Anchor Rods.
• Screw anchors consist of an unthreaded triple eye rod with an angled point, and a firmly welded helix.
• Hot dip galvanized to meet ASTM Specification A123.
• Holding strength per soil class for 3/4" rod:
  • Soil Class 5: 6500 lbs
  • Soil Class 6: 5000 lbs
  • Soil Class 7: 2500 lbs
• Typical working torque is 400 ft lbs.

Material:  Carbon steel    C1045        
Process: Forging          
Surface: hot Dip Galvanized,        
Packing:  pallet        
Standard: ASTM E488        
Main Maket: Europe, Middle East, US, Australia, Canada, etc        
        
Customized requirements are welcome!        
        
Origin: China FOB Port: : Qingdao        
Lead time: 15~45 Days        
Standard: CE, ISO        


 

The No-Wrench Anchor can be placed with power equipment or by hand. MPS No-Wrench Anchors are made of a forged eye anchor rod with a welded helix and angle cut tip.

These anchors are ideal for use in medium dense to loose soils. Final installed height of the exposed anchor should be 8 to 12 inches above grade level. No-Wrench anchors are Hot Dip Galvanized per ASTM A123.