Foundation Use Steel Helical Piles Anchors Light Pole Post with Spiral Plates

• Customization: Available
• Finish: Hot-Dip Galvanized
• Installation Method: Powered Installation
• Model NO.: MONO 468
• Load Capacity: 2000 lbs
• Material: Alloy
• Type: Rock Anchor
• Steel Grade: 80 Grade
• MOQ: 500 PCS
• Application: as Deep Foundation
• Quality Control: 100% Inspection
• Service: ODM OEM
• Delivery Time: 30~40 Days
• Transportation: Container by Sea
• Transport Package: Pallet
• Specification: customised
• Origin: China
• HS Code: 73082000
• Production Capacity: 100, 000 Ton Per Year
• Package Size: 580.00cm * 230.00cm * 230.00cm
• Package Gross Weight: 2000.000kg

Product Description

Product Description

Helical anchors are a deep foundation system. It consists of a central shaft of various diameters, thicknesses, and spiral plates. The diameters of helical plates depend upon soil conditions and loading.

 

A complete Power Shaft Assembly consists of a lead helix section, extension(s) and guy termination other attachment.  The helix size (diameter) and number of helices are selected for the required holding strength.  The shaft size and rating is selected based on the necessary holding strength and installation torque requirement.  The guy attachment is chosen based on the number of guys

Extensions with helix are placed directly after the lead section (no bare extensions in between). They are used when additional bearing area is needed and to develop increased installation torque.
 

Specifications:

DIAMETER SHAFT-  3/4″, 1/2",3/4",5/8" etc.

LENGTH-  36 INCHES etc.

Eye- 1.5″ Diameter LOOP IS WELDED CLOSED

HELICAL DISC SIZES- 4 INCH AND 6 INCH

FINISH - HDG (HOT DIP GALVANIZED)

PULL OUT RESISTANCE- UP TO 4000 LBS (HARD PAN SOIL)

Screw in Ground Anchor 3/4" x 36" w/ 4" & 6" Helices Galvanized

4″ LEAD HELIX HELPS EASE THE INSTALLATION OF THE LARGER 6″ HELIX

HOT DIP GALVANIZED TO: ASTM SPECIFICATION A123 IDEAL FOR CORROSIVE ENVIRONMENT OR LONG DURATION INSTALLATIONS

RE-USEABLE - CAN BE UNSCREWED AND REINSTALLED

 

Product Name
Material	Carbon Steel
Surface Treatment	Hot Dip Galvanized
Application	Construction,Solar Power System
Certificate	ISO9001,CE
Port	Qingdao
Payment Term	T/T,L/C

Specifications:

DIAMETER SHAFT-  3/4″, 1/2",3/4",5/8" etc.
LENGTH-  36 INCHES etc.
Eye- 1.5″ Diameter LOOP IS WELDED CLOSED
HELICAL DISC SIZES- 4 INCH AND 6 INCH
FINISH - HDG (HOT DIP GALVANIZED)
PULL OUT RESISTANCE- UP TO 4000 LBS (HARD PAN SOIL)
Screw in Ground Anchor 3/4" x 36" w/ 4" & 6" Helices Galvanized
4″ LEAD HELIX HELPS EASE THE INSTALLATION OF THE LARGER 6″ HELIX
HOT DIP GALVANIZED TO: ASTM SPECIFICATION A123 IDEAL FOR CORROSIVE ENVIRONMENT OR LONG DURATION INSTALLATIONS
RE-USEABLE - CAN BE UNSCREWED AND REINSTALLED

Hot Dip Galvanized per ASTM A123.


Consists of solid square shafts, ranging from 1.5″ to 2″. The piles are typically used for ultimate loads between 100 and 650 kN (25-150 kips) but have been tested to loads in excess of 900 kN (200 kips) in unique situations.
Square shaft products are generally used in small to moderate loading applications, and they provide excellent tension resistance. Square shaft piles are able to penetrate dense and cobble-rich soil when compared to their helical pipe pile equivalents, but they have lower resistance to buckling and negligible lateral load resistance.
In applications where tension is the primary consideration, we recommend the Square Shaft Piers. They have several advantages over the typical square shaft anchors.


Square Shaft Advantages:
•    Greater yield and Tensile strength
•    Patented Cross-bolt Connection
•    Increased safety factor
•    Higher torque capacity
•    Easy to install
•    Installs in any season
•    Minimal soil disturbance
•    Not affected by a high water table
 
Composition:
•    square solid shaft 1 1/2" thru 2″ O.D. typical.
•    Solid round cornered Square (RCS), yield strength of grade 70 or 90. 
•    Ultimate compression/tension axial capacity: 57 to 200 kip. 
•    Circular tapered plates (helices) are welded to the center of the shaft.
•    Helix diameters can range between 6″ - 48″
•    with a thickness of 3/8″ - 1″.
•    Helix pitch will range from 3″ - 6″
•    Hot dipped galvanized per ASTM A123 or bare steel options available
•    Coupling bolts are heavy hex bolt as per ASTM A325
•    All welding to be done by welders certified of the AWS CODE D1.1
 

Packaging & Shipping

Our Advantages

1. Professional staffs reply your inquiry in 24 working hours.
2. Professional factory : We are the first class helical screws products supplier for Residential, Commercial and Industrial Projects as well as Underpinning and Anchoring.
3. Good quality, competitive pricing and timely service.
4. OEM and ODM service are available here.
5. Sample: Available.

FAQ

1.Are you a trading company or manufacturer?
Manufacturer with factory.
2.What kinds of products do you produce?
It covers rigging hardware, electric power fittings, concrete forming hardware, chain link fence fittings and so on .
3.Is Customized product available?
Yes,please offer your required specifications and drawing
4.What's your Delivery Time?
Generally the samples will be sent immediately by the air express in 3~5 days if the goods are in  stock.Normally within 30 days,please confirm with us before order.