Foundation Steel Helical Anchor Screw Pile No Wrench Anchor Expanding Rock Anchor

• Customization: Available
• Finish: Hot-Dip Galvanized
• Installation Method: Powered Installation
• Model NO.: MONO 468
• Load Capacity: 2000 lbs
• Material: Steel
• Type: Helical Anchor
• Raw Material: Customized
• Helix: Customized
• Shaft: Customized
• Diameter: 2-7/8"
• Tube Thickness: 0.217", 0.276"
• Surface Treatment: Hot DIP Galvanizing with an Average of Over 80 Mic
• Transport Package: Steel Pallet
• Specification: customised
• Origin: China
• HS Code: 730110
• Production Capacity: 50000 Sets Per Year

Product Description

 

Product Parameters

Shaft

Square Shaft
Consists of solid square shafts, ranging from 1.5″ to 2″. The piles are typically used for ultimate loads between 100 and 650 kN (25-150 kips) but have been tested to loads in excess of 900 kN (200 kips) in unique situations.
Square shaft products are generally used in small to moderate loading applications, and they provide excellent tension resistance. Square shaft piles are able to penetrate dense and cobble-rich soil when compared to their helical pipe pile equivalents, but they have lower resistance to buckling and negligible lateral load resistance.
In applications where tension is the primary consideration, we recommend the Square Shaft Piers. They have several advantages over the typical square shaft anchors.


Square Shaft Advantages:

• Greater yield and Tensile strength
• Patented Cross-bolt Connection
• Increased safety factor
• Higher torque capacity
• Easy to install
• Installs in any season
• Minimal soil disturbance
• Not affected by a high water table

 
Composition:

• square solid shaft 1 1/2" thru 2″ O.D. typical.
• Solid round cornered Square (RCS), yield strength of grade 70 or 90.
• Ultimate compression/tension axial capacity: 57 to 200 kip.
• Circular tapered plates (helices) are welded to the center of the shaft.
• Helix diameters can range between 6″ - 48″
• with a thickness of 3/8″ - 1″.
• Helix pitch will range from 3″ - 6″
• Hot dipped galvanized per ASTM A123 or bare steel options available
• Coupling bolts are heavy hex bolt as per ASTM A325
• All welding to be done by welders certified of the AWS CODE D1.1

High-Strength 1.5″, Round-Corner Square Shaft with Forged Upset Coupler has a patented alternating helix pattern reduces wobble and improves plumbness and tracking. The true helix shape limits auguring and provides better quality assurance through valid capacity to torque correlations.
Additional information:

Shaft	RCSS 1.5″ x 1.5″ ASTM A29 Grade 90 ksi, or Equivalent
Helices	3/8″ Thick, Helix Die-Pressed ASTM A36, or Better 8″, 10″, 12″ & 14″ Diameter Available
Coating	Galvanized (G), Bare Steel (NG), Epoxy Powder Coated (EP)
Pitch	3″
Ultimate Capacity-to-Torque Ratio	10 ft-1
Maximum Installation Torque	7,000 ft-lbs
Capacity by Torque	36 Tons Ultimate Capacity 18 Tons Allowable Capacity
Structural Capacity	36 Tons Ultimate Capacity 18 Tons Allowable Capacity