The ground mounting system was widely used in the construction of large-scale solar power station support, the material mainly made of steel solar system and aluminum solar system. Based on the global construction performance, the scope of the use of shaped steel ground pv solar system is relatively large, while the aluminum ground PV solar system is relatively small.
Steel PV bracket system has high cost performance,high strength, standard outdoor use,and high global recognition. Alminum PV bracket system has the advantages of anti-corrosion, no rust, beautiful, easy to install, its main anti-corrosion and rust ability outstanding, suitable for the installation of small ground and medium-sized roof photovoltaic power generation system, light and convenient construction.
Solar Panel Mounting Brackets are made for photovoltaic ground systems which featured with light weight, high strength and recyclable material.
They can be mounted on concrete foundation or ground screws. Customized tilt angles meet complex requirements of construction site and use effectively energy of sun.
Pre-assembled beam saves labor time, reduces cost and makes installation quick.
| Product Name |
Solar Ground Mounting System |
| Material |
AL-6005-T5 high Strength Aluminum Alloy |
| Foundation |
Ground Screw |
| Warranty |
10 years warranty and 25 years service life |
| Standard |
JIC8955-2017 Design Guide On Structures For Photovoltaic Array |
| Max Wind Load |
Up to 60m/s |
| Snow Load |
Up to 1.4KN/M² |
| Applicable Module |
Framed Or Frameless |
| Module Orientation |
Portrait or Landscape |
Benefits:
1.The Tianyicool mounting system compatible with most of the major framed and frameless PV modules on the market.
2.Products were designed by the experienced designers which have the systematic design, stable structure, mature technology, can reduce the difficulty of the installation on the most conditions.
3.The pre-assembled design of the highest level in factory simplifies construction site work to the largest degree and therefore installation is simple and quick. It can effectively improve construction efficiency, shorten construction period and reduce construction costs.
4.Reduced installation times due to high pre-fabrication level; Minimized assembly time and effort (up to 40%).
5.The racking systems can withstand extreme weather condition. The main supporting components have also been tested to ensure their structure and bearing capacity.
6.The mounting system suitable for various kinds of project, including residential project, commercial project, utility project
Production Process
1. Technical Parameters :
| Item |
Parameter |
| Application |
Mountain, Plain, Highland, Desert |
| Installation Angle |
Fixed degree,5-45° |
| Wind Load |
≤60m/s |
| Snow Load |
≤1.4KN/m² |
| Applicable Module |
Framed or Frameless |
| Material |
Q235B,Q345B,Component Aluminum Alloy & Stainless Steel etc, Customized upon requirement. |
| Module Orientation |
portrait or landscape |
| Module type |
Any type of PV moduels |
| Surface Treatment |
Hot Dip Galvanizing & Anodized |
| Warranty |
10 years warranty and 25 years duration |
1.Economical solution Most economical ground mounting system.Lightweight, easy transportation and installation, safe construction.
2.Competitive price High corrosion resistance, salt tolerance.
3.Suitable for any soil type, Suitable for any soil type can be installed on even or uneven slopes
4.Modular design Modular design allows for simple.Maximum pre-assembly, save construction time and labor cost.
Features
1.Single-axis tracking system is scientifically designed and precision calculated to fully guarantee the mechanical strength of each component.
2. The polymer material bearing can effectivelly prevent sand dust, rain and snow erosion.
3. The anti-shadow design effectively avoids shadow blocking problems in the morning and evening and increases power generation.
4. Intelligent electrical control ensures long term reliability and easy maintenance.
APPLICATION SCENARIOS
Installation Steps
Necessary information:
For the solution and quotation, we need some details as the following:
| No. |
Item |
Remarks |
| 1 |
Location, Country of the Projects |
|
| 2 |
What's Total Capacity (Watts) of PV Carport ? |
|
| 3 |
Steel Carport or Aluminum Carport? |
|
| 4 |
How many Parking Space? |
|
| 5 |
What's the total size of the whole Carport?Better sending CAD drawing |
|
| 6 |
Wind Load: xx m /s ? |
|
| 7 |
Snow Load: kN/m2 |
|
| 8 |
What's watts of each module? |
|
| 9 |
Module Size ? (Length * Width * Thickness) |
|
| 10 |
What's the Angle of Installation of solar panel? |
|
| 11 |
When will the PV Carport be installed? |
|
| 12 |
Layout of Solar Modules(Landscape or Portrait installation) |
|
| 13 |
parking enviorment picture. |
|
| 14 |
off-grid or on-grid project? |
|
| 15 |
your any other requirements ? |
|
Welcome to tell us your ideas on blank as below now!
){kind=link}